ClearChoice clinician bibliography

Fleigel, J. D., Tunder, G. S., & Villalobos, J. J. (2010). A maxillary obturator prosthesis for an active duty air Force flyer: a case report. Military Medicine, 175(9), 697–700.
https://doi.org/10.7205/milmed-d-10- 00030

Mealey, B. L., Tunder, G. S., & Pemble, C. W. (2002). Primary extranodal malignant lymphoma affecting the periodontium. Journal of Periodontology, 73(8), 937–941.
https://doi.org/10.1902/jop.2002.73.8.937

Scudder, C. A., Batourina, E. Y., & Tunder, G. S. (1998). Comparison of two methods of producing adaptation of saccade size and implications for the site of plasticity. Journal of Neurophysiology, 79(2), 704–715. https://doi.org/10.1152/jn.1998.79.2.704

Varapongsittikul, P., Chitkraisorn, T., Chaianant, N., Tosiriwatanapong, T., & Prateepsawangwong, B. (2019). Fracture resistance of endodontically treated maxillary premolars restored with lithium disilicate restorations using three different retentive techniques. Chulalongkorn University Dental Journal, 42(2), 65-76.

Varapongsittikul, P. (2019). Fracture resistance of endodontically treated maxillary premolars restored with lithium disilicate restorations using three different retentive techniques. Deleted Journal, 42(2), 65–76.
https://doi.org/10.58837/chula.cudj.42.2.1

Aladily, T., Eid, H., Waia, D., & Baba, F. (2023). The spectrum of oral pathology specimens: A histopathologic analysis of 442 specimens. Jordan Medical Journal, 57(1).
https://doi.org/10.35516/jmj.v57i1.1098

Al-Tarawneh, S. K., Thalji, G., Lozada, M. F., Waia, D., & Cooper, L. F. (2024). Comparing single tooth implant placement with and without allogenic soft tissue augmentation. a randomized clinical trial. The International Journal of Oral & Maxillofacial Implants, 1–37.
https://doi.org/10.11607/jomi.10690

Alkhouri, S., Waite, P. D., Davis, M. B., Lamani, E., & Kau, C. H. (2017). Maxillary distraction osteogenesis in unilateral cleft lip and palate patients with rigid external distraction system. Annals of Maxillofacial Surgery, 7(1), 57.
https://doi.org/10.4103/ams.ams_174_16

Anver, T. D., Mirzai, L., Li, P., Powell, K. K., & Waite, P. D. (2019). Long-Term postoperative Cone-Beam computed tomography analysis of secondary bone grafting in 79 patients with unrepaired alveolar clefts. Journal of Oral and Maxillofacial Surgery, 78(7), 1164–1170.
https://doi.org/10.1016/j.joms.2019.10.010

Araujo, M. M., Waite, P. D., & Lemons, J. E. (2001). Strength analysis of Le Fort I osteotomy fixation: Titanium versus resorbable plates. Journal of Oral and Maxillofacial Surgery, 59(9), 1034–1039.
https://doi.org/10.1053/joms.2001.25832

Bach, D. E., Waite, P. D., & Adams, R. C. (1994). Autologous TMJ disk replacement. The Journal of the American Dental Association, 125(11), 1504–1512.
https://doi.org/10.14219/jada.archive.1994.0231

Boyd, S. B., Chigurupati, R., Cillo, J. E., Eskes, G., Goodday, R., Meisami, T., Viozzi, C. F., Waite, P., & Wilson, J. (2018). Maxillomandibular advancement improves multiple Health-Related and functional outcomes in patients with obstructive sleep apnea: a multicenter study. Journal of Oral and Maxillofacial Surgery, 77(2), 352–370.
https://doi.org/10.1016/j.joms.2018.06.173

Boyd, S. B., Walters, A. S., Waite, P., Harding, S. M., & Song, Y. (2015). Long-Term effectiveness and safety of maxillomandibular advancement for treatment of obstructive sleep apnea. Journal of Clinical Sleep Medicine, 11(07), 699–708.
https://doi.org/10.5664/jcsm.4838

Celebi, A. A., Cron, R., Stoll, M., Simsek, S., Kinard, B., Waite, P. D., Wang, J., Vo, V., Tran, L., & Kau, C. H. (2021). Comparison of the Condyle-Fossa relationship and resorption between patients with and without Juvenile idiopathic arthritis (JIA). Journal of Oral and Maxillofacial Surgery, 80(3), 422–430.
https://doi.org/10.1016/j.joms.2021.09.004

Cheng, G. C., Koomullil, R. P., Ito, Y., Shih, A. M., Sittitavornwong, S., & Waite, P. D. (2012). Assessment of surgical effects on patients with obstructive sleep apnea syndrome using computational fluid dynamics simulations. Mathematics and Computers in Simulation, 106, 44–59.
https://doi.org/10.1016/j.matcom.2012.11.008

Christou, T., Kau, C. H., Waite, P. D., Kheir, N. A., & Mouritsen, D. (2013). Modified method of analysis for surgical correction of facial asymmetry. Annals of Maxillofacial Surgery, 3(2), 185.
https://doi.org/10.4103/2231-0746.119218

Dammling, C., Waite, P., & Beukelman, T. (2019a). Primary oral presentation of sarcoidosis in a pediatric patient. Journal of Oral and Maxillofacial Surgery, 77(6), 1180–1186.
https://doi.org/10.1016/j.joms.2019.01.018

Dammling, C., Waite, P., & Beukelman, T. (2019b). Primary oral presentation of sarcoidosis in a pediatric patient. Journal of Oral and Maxillofacial Surgery, 77(6), 1180–1186.
https://doi.org/10.1016/j.joms.2019.01.018

Deatherage, J. D., & Waite, P. D. (2017). Sleep apnoea and snoring, including non-surgical techniques. In Operative Oral and Maxillofacial Surgery, third edition (pp. 805–814).
https://doi.org/10.1201/9781315113784

Denson, D. A., Waite, P. D., Digumarthi, H., & Everts, J. E. (2016). Does practice type determine the complexity of patients encountered for orthognathic surgery? Journal of Oral and Maxillofacial Surgery, 74(8), 1643–1648.
https://doi.org/10.1016/j.joms.2016.02.014

Falconer, D. S., & Waite, P. D. (2013). Surgical management of skeletal vertical facial problems.Seminars in Orthodontics, 19(4), 293–304.
https://doi.org/10.1053/j.sodo.2013.07.003

Gutta, R., & Waite, P. D. (2008). Cranial bone grafting and simultaneous implants: a submental technique to reconstruct the atrophic mandible. British Journal of Oral and Maxillofacial Surgery, 46(6), 477–479.
https://doi.org/10.1016/j.bjoms.2007.11.008

Gutta, R., & Waite, P. D. (2009). Outcomes of calvarial bone grafting for alveolar ridge reconstruction.PubMed, 24(1), 131–136.
https://pubmed.ncbi.nlm.nih.gov/19344036

Ito, Y., Cheng, G. C., Shih, A. M., Koomullil, R. P., Soni, B. K., Sittitavornwong, S., & Waite, P. D. (2011). Patient-specific geometry modeling and mesh generation for simulating Obstructive Sleep Apnea Syndrome cases by Maxillomandibular Advancement. Mathematics and Computers in Simulation, 81(9), 1876–1891.
https://doi.org/10.1016/j.matcom.2011.02.006

Jones, L. C., & Waite, P. D. (2012). Orthognathic surgery and partial glossectomy in a patient with Merosin-Deficient congenital muscular dystrophy. Journal of Oral and Maxillofacial Surgery, 70(2), e141–e146.
https://doi.org/10.1016/j.joms.2011.10.011

Jugan, M. J., Sellers, V. A., & Waite, P. D. (2002). Endoscopic forehead rejuvenation: using bone channels for Soft-Tissue suspension. The American Journal of Cosmetic Surgery, 19(2), 77–85.
https://doi.org/10.1177/074880680201900202

Kau, C. H., Vincent, J., Oberoi, S., Kau, S. Y. C., & Waite, P. D. (2023). Surgery first approach for dentofacial deformity correction of a patient with achondroplasia: a case report [Case Report]. Frontiers of Oral and Maxillofacial Medicine.
https://doi.org/10.21037/fomm-23-9

Kau, C., Salazar, A., & Waite, P. (2020). Enhancing the orthognathic surgery experience: Treatment in 10 weeks “surgery first” approach. Annals of Maxillofacial Surgery, 10(1), 227.
https://doi.org/10.4103/ams.ams_203_19

Kelly, S. E., & Waite, P. D. (2013). The role of the general dentist in the management of obstructive sleep apnea, application of oral appliance therapy, and the indication for surgery. General dentistry, 61(7), 30–37.Koehler, J., & Waite, P. (2022). Basic principles of rhinoplasty. In Springer eBooks (pp. 2181–2208).
https://doi.org/10.1007/978-3-030-91920-7_73

Kongsong, W., Waite, P. D., & Alshahrani, F. (2022). Comparison of airway changes after maxillomandibular advancement with or without genial tubercle advancement in obstructive sleep apnea using cone-beam computed tomography. American Journal of Orthodontics and Dentofacial Orthopedics, 162(5), 616–625.
https://doi.org/10.1016/j.ajodo.2021.05.016

Kyteas, P. G., McKenzie, W. S., Waite, P. D., & Kau, C. H. (2016). Comprehensive treatment approach for condylar hyperplasia and mandibular crowding with custom lingual braces and 2-jaw surgery.American Journal of Orthodontics and Dentofacial Orthopedics, 151(1), 174–185.
https://doi.org/10.1016/j.ajodo.2015.11.032

Lachner, J., Clanton, J. T., & Waite, P. D. (1991). Open reduction and internal rigid fixation of subcondylar fractures via an intraoral approach. Oral Surgery Oral Medicine Oral Pathology, 71(3), 257–261.
https://doi.org/10.1016/0030-4220(91)90295-n

Lai, J. B., Boyce, J. R., Sittitavornwong, S., & Waite, P. D. (2010). Use of Transnasal Jet Ventilation– Assisted Fiberoptic intubation in obstructive sleep apnea patients undergoing orthognathic Surgery: a new technique. Journal of Oral and Maxillofacial Surgery, 68(8), 2025–2027.
https://doi.org/10.1016/j.joms.2009.10.009

Lai, J. B., Sittitavornwong, S., & Waite, P. D. (2010). Computer-Assisted designed and Computer- Assisted manufactured polyetheretherketone prosthesis for complex Fronto-Orbito-Temporal defect. Journal of Oral and Maxillofacial Surgery, 69(4), 1175–1180.
https://doi.org/10.1016/j.joms.2010.05.034

Louis, P. J., Austin, R., Waite, P. D., & Mathews, C. S. (2001). Soft tissue changes of the upper lip associated with maxillary advancement in obstructive sleep apnea patients. Journal of Oral and Maxillofacial Surgery, 59(2), 151–156.
https://doi.org/10.1053/joms.2001.20485

Louis, P. J., & Waite, P. D. (2008). S122: Use of titanium mesh with particulate bone graft versus calvarial bone graft in alveolar ridge reconstruction for implant placement. Journal of Oral and Maxillofacial Surgery, 66(8), 147.
https://doi.org/10.1016/j.joms.2008.05.293

Louis, P. J., Waite, P. D., & Austin, R. B. (1993). Long-term skeletal stability after rigid fixation of Le Fort I osteotomies with advancements. International Journal of Oral and Maxillofacial Surgery, 22(2), 82–86.
https://doi.org/10.1016/s0901-5027(05)80808-2

Louis, P. J., West, W. F., Tilley, M. S., Waite, P. D., & Cuzalina, L. A. (1998). A CASE REPORT: CHONDROMATOSIS OF THE TEMPOROMANDIBULAR JOINT. The Journal of the American Dental Association, 129(7), 1010–1013.
https://doi.org/10.14219/jada.archive.1998.0355

Lu, C., Huguley, S., Cui, C., Cabaniss, L. B., Waite, P. D., Sarver, D. M., Mamaeva, O. A., & MacDougall, M. (2015). Effects of FGFR signaling on cell proliferation and differentiation of apert dental cells. Cells Tissues Organs, 201(1), 26–37.
https://doi.org/10.1159/000441349

Lye, K. W., Deatherage, J. R., & Waite, P. D. (2008). The use of demineralized bone matrix for grafting during Le Fort I and chin osteotomies: techniques and complications. Journal of Oral and Maxillofacial Surgery, 66(8), 1580–1585.
https://doi.org/10.1016/j.joms.2007.12.003

Lye, K. W., Waite, P. D., Meara, D., & Wang, D. (2008). Quality of life Evaluation of maxillomandibular advancement surgery for treatment of obstructive sleep apnea. Journal of Oral and Maxillofacial Surgery, 66(5), 968–972.
https://doi.org/10.1016/j.joms.2007.11.031

Lye, K. W., Waite, P. D., Wang, D., & Sittitavornwong, S. (2008). Predictability of prebent advancement plates for use in maxillomandibular advancement surgery. Journal of Oral and Maxillofacial Surgery, 66(8), 1625–1629.
https://doi.org/10.1016/j.joms.2007.11.034

Mathews, A. T., Dammling, C. W., Waite, P. D., & Kinard, B. E. (2022). Does the rigid external distraction device alter maxillary pitch in cleft maxillary distraction? The Cleft Palate-Craniofacial Journal, 60(12), 1572–1577.
https://doi.org/10.1177/10556656221109413

Mehlisch, D. R., Taylor, T. D., Leibold, D. G., Hiatt, R., Waite, D. E., Waite, P. D., Laskin, D. M., & Smith, S.T. (1988). Collagen/hydroxylapatite implant for augmenting deficient alveolar ridges: Twelve-month clinical data. Journal of Oral and Maxillofacial Surgery, 46(10), 839–843.
https://doi.org/10.1016/0278- 2391(88)90046-8

Mehlisch, D. R., Taylor, T. D., Leibold, D. G., Hiatt, R., Waite, D. E., Waite, P. D., Laskin, D. M., Smith, S. T., & Koretz, M. M. (1987). Evaluation of collagen/hydroxylapatite for augmenting deficient alveolar ridges: A preliminary report. Journal of Oral and Maxillofacial Surgery, 45(5), 408–413.
https://doi.org/10.1016/0278-2391(87)90008-5

Metelmann, H., Waite, P., & Kaduk, W. (2007). The overall improvement of outcome results in>oral cancer appears to be related to early detection. Cancer Epidemiology and Prevention Biomarkers,16.
http://cebp.aacrjournals.org/content/16/12_Supplement/A14

Miller, L. L., Kauffmann, D., St John, D., Wang, D., Grant, J. H., & Waite, P. D. (2010). Retrospective review of 99 patients with secondary alveolar cleft repair. Journal of Oral and Maxillofacial Surgery, 68(6), 1283–1289.
https://doi.org/10.1016/j.joms.2009.09.106

Nimkarn, Y., Miles, P. G., & Waite, P. D. (1995). Maxillomandibular advancement surgery in obstructive sleep apnea syndrome patients: Long-term surgical stability. Journal of Oral and Maxillofacial Surgery, 53(12), 1414–1418.
https://doi.org/10.1016/0278-2391(95)90667-3

Oueis, R., Waite, P. D., Wang, J., & Kau, C. H. (2019). Orthodontic-Orthognathic Management of a patient with skeletal class II with bimaxillary protrusion, complicated by vertical maxillary excess: A multi-faceted case report of difficult treatment management issues. International Orthodontics, 18(1), 178–190.
https://doi.org/10.1016/j.ortho.2019.09.002

Patel, K., Kau, C. H., Waite, P. D., & Celebi, A. A. (2017). The surgical management of skeletal disproportion with lingual orthodontics and three-dimensional planning. Annals of Maxillofacial Surgery, 7(1), 112.
https://doi.org/10.4103/ams.ams_55_17

Pearl, C., Chubb, D. W. R., Marchena, J. M., Waite, P., Buendia, A. M., & Kau, C. H. (2021). Surgery first: current state of the art orthognathic surgery and its potential as a primary treatment modality in obstructive sleep apnea with concurrent dentofacial deformities. Frontiers of Oral and Maxillofacial Medicine, 4, 29.
https://doi.org/10.21037/fomm-21-61

Peterson’s Principles of Oral & Maxillofacial Surgery. (n.d.). In G. E. Ghali, P. E. Larsen, & P. D. Waite (Eds.), Peterson’s Principles of Oral & Maxillofacial Surgery (Vol. 1, p. 37).Powell, K. K., Lewis, P., Sesanto, R., & Waite, P. D. (2021). Does early secondary alveolar bone grafting influence need for additional maxillary advancement procedures in cleft lip and palate? The Cleft Palate-Craniofacial Journal, 59(10), 1279–1285.
https://doi.org/10.1177/10556656211042789

Resnick, C. M., & Waite, P. (2022). Pediatric temporomandibular disorders: juvenile idiopathic arthritis. In Springer eBooks (pp. 1693–1704).
https://doi.org/10.1007/978-3-030-91920-7_56

Robin, N. H., Baty, H., Franklin, J., Guyton, F. C., Mann, J., Woolley, A. L., Waite, P. D., & Grant, J. (2006). The multidisciplinary evaluation and management of cleft lip and palate. Southern Medical Journal, 99(10), 1111–1120.
https://doi.org/10.1097/01.smj.0000209093.78617.3a

Shah, N., Waite, P. D., & Kau, C. H. (2020). A combined orthodontic / orthognathic approach in the management of obstructive sleep apnoea: Balancing treatment efficacy and facial aesthetics.Journal of Orthodontics, 47(4), 354–362.
https://doi.org/10.1177/1465312520952451

Sittitavornwong, S., & Waite, P. D. (2007). Reconstruction of severe atrophic maxilla with inverted “L” cranial bone graft and osteotomy: a technical note. Journal of Oral and Maxillofacial Surgery, 65(4), 809–812.
https://doi.org/10.1016/j.joms.2005.10.060

Sittitavornwong, S., & Waite, P. D. (2009). Imaging the Upper Airway in Patients with Sleep Disordered Breathing. Oral and Maxillofacial Surgery Clinics of North America, 21(4), 389–402.
https://doi.org/10.1016/j.coms.2009.08.004

Sittitavornwong, S., Waite, P. D., Holmes, J. D., & Klapow, J. C. (2005). The necessity of routine Clinic Follow-Up visits after third molar removal. Journal of Oral and Maxillofacial Surgery, 63(9), 1278– 1282.
https://doi.org/10.1016/j.joms.2005.05.292

Sittitavornwong, S., Waite, P. D., Shih, A. M., Cheng, G. C., Koomullil, R., Ito, Y., Cure, J. K., Harding, S. M., & Litaker, M. (2013). Computational fluid dynamic analysis of the posterior airway space after maxillomandibular advancement for obstructive sleep apnea syndrome. Journal of Oral and Maxillofacial Surgery, 71(8), 1397–1405.
https://doi.org/10.1016/j.joms.2013.02.022

Sittitavornwong, S., Waite, P. D., Shih, A. M., Koomullil, R., Ito, Y., Cheng, G. C., & Wang, D. (2009). Evaluation of obstructive sleep apnea syndrome by computational fluid dynamics. Seminars in Orthodontics, 15(2), 105–131.
https://doi.org/10.1053/j.sodo.2009.01.005

Smith, C. B., & Waite, P. D. (2011). Surgical Management of obstructive sleep apnea in acromegaly with mandibular prognathism and macroglossia: A treatment dilemma. Journal of Oral and Maxillofacial Surgery, 70(1), 207–210.
https://doi.org/10.1016/j.joms.2011.05.022

Stoll, M. L., Kau, C. H., Waite, P. D., & Cron, R. Q. (2018). Temporomandibular joint arthritis in juvenile idiopathic arthritis, now what? Pediatric Rheumatology, 16(1).
https://doi.org/10.1186/s12969-018- 0244-y

Stoll, M. L., Morlandt, A. B. P., Teerawattanapong, S., Young, D., Waite, P. D., & Cron, R. Q. (2012). Safety and efficacy of intra-articular infliximab therapy for treatment-resistant temporomandibular joint arthritis in children: a retrospective study. Rheumatology, 52(3), 554–559.
https://doi.org/10.1093/rheumatology /kes318

Urban, S. D., & Waite, P. D. (2005). Management of facial asymmetry. The American Journal of Cosmetic Surgery, 22(4), 249–259.
https://doi.org/10.1177/074880680502200405

Vaughan, S. M., Kau, C. H., & Waite, P. D. (2016). Novel Three-Dimensional Understanding of Maxillary Cleft Distraction. Journal of Craniofacial Surgery, 27(6), 1462–1464.
https://doi.org/10.1097/scs.0000000000002772

Veiszenbacher, É., Wang, J., Davis, M., Waite, P. D., Borbély, P., & Kau, C. H. (2019). Virtual surgical planning: Balancing esthetics, practicality, and anticipated stability in a complex Class III patient. American Journal of Orthodontics and Dentofacial Orthopedics, 156(5), 685–693.
https://doi.org/10.1016/j.ajodo.2018.06.021

Waite, P. D. (1986). Evaluation of 49 mitral valve prolapse patients for maxillofacial skeletal deformities and temporomandibular joint dysfunction. Oral Surgery Oral Medicine Oral Pathology, 62(5), 496–499.
https://doi.org/10.1016/0030-4220(86)90309-9

Waite, P. D. (1998). Obstructive sleep apnea. Oral Surgery Oral Medicine Oral Pathology Oral Radiology and Endodontology, 85(4), 352–361.
https://doi.org/10.1016/s1079-2104(98)90056-7

Waite, P. D. (2005). Complications and management considerations in Sleep-Related Breathing Disorders. Journal of Oral and Maxillofacial Surgery, 63(8), 13–14.
https://doi.org/10.1016/j.joms.2005.05.027

Waite, P. D. (2007). Discussion. Journal of Oral and Maxillofacial Surgery, 65(10), 2072.
https://doi.org/10.1016/j.joms.2006.05.070

Waite, P. D. (2010a). Preface. Oral and Maxillofacial Surgery Clinics of North America, 22(3), ix–x.
https://doi.org/10.1016/j.coms.2010.06.004

Waite, P. D., & Cherala, S. (2006). Surgical outcomes for Suture-Less surgery in 366 impacted third molar patients. Journal of Oral and Maxillofacial Surgery, 64(4), 669–673.
https://doi.org/10.1016/j.joms.2005.12.014

Waite, P. D., & Reynolds, R. R. (1998). Surgical management of impactedthird molars. Seminars in Orthodontics, 4(2), 113–123.
https://doi.org/10.1016/s1073-8746(98)80008-x

Waite, P. D., Sastravaha, P., & Lemons, J. E. (2004). Biologic mechanical advantages of 3 different cranial bone grafting techniques for implant reconstruction of the atrophic maxilla. Journal of Oral and Maxillofacial Surgery, 63(1), 63–67.
https://doi.org/10.1016/j.joms.2004.09.007

Waite, P. D., & Vilos, G. A. (2002). Surgical changes of posterior airway space in obstructive sleep apnea. Oral and Maxillofacial Surgery Clinics of North America, 14(3), 385–399.
https://doi.org/10.1016/s1042-3699(02)00033-x

Waite, P. D., & Waite, D. E. (1996). Bone grafting for the alveolar cleft defect. Seminars in Orthodontics, 2(3), 192–196.
https://doi.org/10.1016/s1073-8746(96)80014-4

Waite, P., & Kau, C. H. (2022). Facial asymmetry. In Peterson’s Principles of Oral and Maxillofacial Surgery (pp. 1989–2018).
https://doi.org/10.1007/978-3-030-91920-7_66

Waite, P., & McCallum, C. A. (1986). Mitral valve prolapse in craniofacial skeletal deformities. Oral Surgery Oral Medicine Oral Pathology, 61(1), 15–18.
https://doi.org/10.1016/0030-4220(86)90195-7

Wang, J., Veiszenbacher, E., Waite, P. D., & Kau, C. H. (2019). Comprehensive treatment approach for bilateral idiopathic condylar resorption and anterior open bite with customized lingual braces and total joint prostheses. American Journal of Orthodontics and Dentofacial Orthopedics, 156(1), 125–136.
https://doi.org/10.1016/j.ajodo.2018.02.017

Wilson, W. H., Waite, P. D., Alrajhi, Z., Powell, K., Cron, R. Q., & Kinard, B. (2022). Surgical management of juvenile idiopathic arthritis related dentofacial deformities. FACE, 3(1), 74–79.
https://doi.org/10.1177/27325016211069661

Wright, J. T., Waite, P., Mueninghoff, L., & Sarver, D. M. (1991). The multidisciplinary approach Managing Enamel Defects. The Journal of the American Dental Association, 122(2), 62–65.
https://doi.org/10.14219/jada.archive.1991.0071

Ying, Y., & Waite, P. (2022). Surgical and nonsurgical manssagement of obstructive sleep apnea. InSpringer eBooks (pp. 2135–2159).
https://doi.org/10.1007/978-3-030-91920-7_71

Zouhary, K. J., Said-Al-Naief, N., & Waite, P. D. (2008). Ameloblastic fibro-odontoma: expansile mixed radiolucent lesion in the posterior maxilla: a case report. Oral Surgery Oral Medicine Oral Pathology Oral Radiology and Endodontology, 106(4), e15–e21.
https://doi.org/10.1016/j.tripleo.2008.05.038

Ellis, D. J., & Walters, P. J. (1972). Aneurysmal bone cyst of the maxilla. Oral Surgery Oral Medicine Oral Pathology, 34(1), 26–32.
https://doi.org/10.1016/0030-4220(72)90269-1

Hudzinski, L. G., & Walters, P. J. (1987). Use of a portable electromyogram integrator and biofeedback unit in the treatment of chronic nocturnal bruxism. Journal of Prosthetic Dentistry, 58(6), 698–701.
https://doi.org/10.1016/0022-3913(87)90422-7

Jain, A. K., Ryan, J. R., McMahon, F. G., Kuebel, J. O., Walters, P. J., & Noveck, C. (1986). Analgesic efficacy of low‐dose ibuprofen in dental extraction pain. Pharmacotherapy the Journal of Human Pharmacology and Drug Therapy, 6(6), 318–322.
https://doi.org/10.1002/j.1875-9114.1986.tb03494.x

Phillips, D. J., Walters, P. J., Rogal, O. J., Stack, B. C., Weiner, L. B., & Klemons, I. M. (1989). Recommended Guide to the Evaluation of Permanent Impairment of the Temporomandibular Joint. CRANIO®, 7(1), 13–21.
https://doi.org/10.1080/08869634.1989.11678263

Sardi, A., & Walters, P. J. (1991). Modified mandibular swing procedure for resection of carcinoma of the oropharynx. Head & Neck, 13(5), 394–397.
https://doi.org/10.1002/hed.2880130503

Walters, P. J., & Geist, E. T. (1983). Correction of temporomandibular joint internal derangements via the posterior auricular approach. Journal of Oral and Maxillofacial Surgery, 41(9), 616–618.
https://doi.org/10.1016/0278-2391(83)90168-4

Wang, T. C. (2012). 4-Year radiographic & esthetic evaluation of Peri-Implant tissue in immediate implants replacing single teeth in the esthetic zone [University of North Carolina at Chapel Hill].
https://cdr.lib.unc.edu/concern/dissertations/c821gk91n

Wang, T., De Kok, I., Zhong, S., Vo, C., Mendonça, G., Nares, S., & Cooper, L. (2019). The role of Implant- Tooth distance on marginal bone levels and esthetics. The International Journal of Oral & Maxillofacial Implants, 34(2), 499–505.
https://doi.org/10.11607/jomi.6809

Buser, D., Weber, H. P., Brägger, U. and Balsiger, C.: Gewebeintegration einphasiger ITI-Implantate: Drei-Jahres-Ergebnisse einer prospektiven Langzeitstudie mit Hohlzylinder- und Hohlschrauben- implantaten. Parodontologie 1992;3: 189-199.

Sutter, F., Weber, H. P., Sorensen, J., and Belser, U.: The new restorative concept of the ITI Dental Implant System. Design and engineering. Int. J Perio Restor Dent 1993; 13:408-431.

Nakajima, Y., Weber, H. P., Buser, D., Caruso, G., Paquette, D. W. Fiorellini, J. P., Seto, K., and Williams,R. C.: Rigenerazione ossea guidata. Valutazione radiografica di rigenerazione ossea nei difetti alveolari nel cane beagle. Rivista di Odontolatria 1997;2: 69-73.

A, J., Hp, W., C, G., B, S., Z, C., Up, S., & Np, L. (1992). Periodontal conditions in Swiss Army recruits.PubMed, 102(5), 541–548.
https://pubmed.ncbi.nlm.nih.gov/1598554

Buser, D., Weber, H., Brägger, U., & Balsiger, C. (1992). Tissue integration of one-stage ITI implants: 3- year results of a longitudinal study with hollow-cylinder and hollow-screw implants. Implant Dentistry, 1(3), 231.
https://doi.org/10.1097/00008505-199200130-00016

Buser, D., Weber, H., & Lang, N. P. (1990). Tissue integration of non‐submerged implants. l‐year results of a prospective study with 100 ITI hollow‐cylinder and hollow‐screw implants. Clinical Oral Implants Research, 1(1), 33–40.
https://doi.org/10.1034/j.1600-0501.1990.010105.x

Buser, D., Weber, H. P., Donath, K., Fiorellini, J. P., Paquette, D. W., & Williams, R. C. (1992). Soft tissue reactions to Non‐Submerged unloaded titanium implants in beagle dogs. Journal of Periodontology, 63(3), 225–235.
https://doi.org/10.1902/jop.1992.63.3.225

Cochran, D. L., Simpson, J., Weber, H. P., & Buser, D. (1994). Attachment and growth of periodontal cells on smooth and rough titanium. PubMed, 9(3), 289–297.
https://pubmed.ncbi.nlm.nih.gov/29624192

Fiorellini, J. P., Engebretson, S. P., Donath, K., & Weber, H. P. (1998). Guided bone regeneration utilizing expanded polytetrafluoroethylene membranes in combination with submerged and nonsubmerged dental implants in beagle dogs. Journal of Periodontology, 69(5), 528–535.
https://doi.org/10.1902/jop.1998.69.5.528

Howell, T. H., Fiorellini, J., Weber, H. P., & Williams, R. C. (1991). Effect of the NSAID piroxicam, topically administered, on the development of gingivitis in Beagle dogs. Journal of Periodontal Research, 26(3), 180–183.
https://doi.org/10.1111/j.1600-0765.1991.tb01643.x

Karimbux, N. Y., Sirakian, A., Weber, H. P., & Nishimura, I. (1995). A new animal model for molecular biological analysis of the implant-tissue interface: spatial expression of type XII collagen mRNA around a titanium oral implant. PubMed, 21(2), 107–5.
https://pubmed.ncbi.nlm.nih.gov/8699501

Listgarten, M., Buser, D., Steinemann, S., Donath, K., Lang, N., & Weber, H. (1992). Light and transmission electron microscopy of the intact interfaces between non-submerged titanium-coated epoxy resin implants and bone or gingiva. Journal of Dental Research, 71(2), 364–371.
https://doi.org/10.1177/00220345920710020401

Lynch, S. E., Buser, D., Hernandez, R. A., Weber, H., Stich, H., Fox, C. H., & Williams, R. C. (1991). Effects of the Platelet‐Derived growth Factor/Insulin‐Like growth Factor‐I combination on bone regeneration around titanium dental implants. results of a pilot study in beagle dogs. Journal of Periodontology, 62(11), 710–716.
https://doi.org/10.1902/jop.1991.62.11.710

Pham, A. N., Fiorellini, J. P., Paquette, D., Williams, R. C., & Weber, H. P. (1994). Longitudinal radiographic study of crestal bone levels adjacent to non-submerged dental implants. PubMed, 20(1), 26–34.
https://pubmed.ncbi.nlm.nih.gov/7932853

Tanner, A., Maiden, M. F. J., Lee, K., Shulman, L. B., & Weber, H. P. (1997). Dental implant infections.Clinical Infectious Diseases, 25(s2), S213–S217.
https://doi.org/10.1086/516243

Weber, H., Fiorellini, J. P., & Jeffcoat, M. C. (1997). Clinical trials on placement of implants in existing bone. Annals of Periodontology, 2(1), 315–328.
https://doi.org/10.1902/annals.1997.2.1.315

Weber, H. P., Buser, D., Donath, K., Fiorellini, J. P., Doppalapudi, V., Paquette, D. W., & Williams, R. C. (1996). Comparison of healed tissues adjacent to submerged and non‐submerged unloaded titanium dental implants. A histometric study in beagle dogs. Clinical Oral Implants Research, 7(1), 11–19.
https://doi.org/10.1034/j.1600-0501.1996.070102.x

Weber, H. P., Buser, D., Fiorellini, J. P., & Williams, R. C. (1992). Radiographic evaluation of crestal bone levels adjacent to nonsubmerged titanium implants. Clinical Oral Implants Research, 3(4), 181–188.
https://doi.org/10.1034/j.1600-0501.1992.030405.x

Weber, H. P., & Fiorellini, J. P. (1992). The biology and morphology of the implant-tissue interface.PubMed, 85(4), 61–64.
https://pubmed.ncbi.nlm.nih.gov/1308344

Weber, H. P., Fiorellini, J. P., Paquette, D. W., Howell, T. H., & Williams, R. C. (1994). Fixed implant‐ supported prostheses in the edentulous maxilla. A five‐year follow‐up report. Clinical Oral Implants Research, 5(3), 148–153.
https://doi.org/10.1034/j.1600-0501.1994.050305.x

Willer, J., Rossbach, A., & Weber, H. P. (1998). Computer-assisted milling of dental restorations using a new CAD/CAM data acquisition system. Journal of Prosthetic Dentistry, 80(3), 346–353.
https://doi.org/10.1016/s0022-3913(98)70136-2

Nevins, M. L., Karimbux, N. Y., Weber, H. P., Giannobile, W. V., & Fiorellini, J. P. (1998). Wound healing around endosseous implants in experimental diabetes. The International journal of oral & maxillofacial implants, 13(5), 620–629.

Fiorellini, J. P., Buser, D., Paquette, D. W., Williams, R. C., Haghighi, D., & Weber, H. P. (1999). A radiographic evaluation of bone healing around submerged and non-submerged dental implants in beagle dogs. Journal of periodontology, 70(3), 248–254.
https://doi.org/10.1902/jop.1999.70.3.248

Lee, K. H., Maiden, M. F., Tanner, A. C., & Weber, H. P. (1999). Microbiota of successful osseointegrated dental implants. Journal of periodontology, 70(2), 131–138.
https://doi.org/10.1902/jop.1999.70.2.131

Fiorellini, J. P., Nevins, M. L., Norkin, A., Weber, H. P., & Karimbux, N. Y. (1999). The effect of insulin therapy on osseointegration in a diabetic rat model. Clinical oral implants research, 10(5), 362–368.
https://doi.org/10.1111/j.1600-0501.1999.tb00011.x

Corso, M., Sirota, C., Fiorellini, J., Rasool, F., Szmukler-Moncler, S., & Weber, H. P. (1999). Clinical and radiographic evaluation of early loaded free-standing dental implants with various coatings in beagle dogs. The Journal of prosthetic dentistry, 82(4), 428–435.
https://doi.org/10.1016/s0022- 3913(99)70029-6

Lee, K. H., Tanner, A. C., Maiden, M. F., & Weber, H. P. (1999). Pre- and post-implantation microbiota of the tongue, teeth, and newly placed implants. Journal of clinical periodontology, 26(12), 822–832.
https://doi.org/10.1111/j.1600-051x.1999.tb02527.x

Weber, H. P., Crohin, C. C., & Fiorellini, J. P. (2000). A 5-year prospective clinical and radiographic study of non-submerged dental implants. Clinical oral implants research, 11(2), 144–153.

Gartner, J. L., Mushimoto, K., Weber, H., & Nishimura, I. (2000). Effect of osseointegrated implants on the coordination of masticatory muscles: A pilot study. Journal of Prosthetic Dentistry, 84(2), 185–193.
https://doi.org/10.1067/mpr.2000.108067

Heckmann, S. M., Heckmann, J. G., & Weber, H. P. (2000). Clinical outcomes of three Parkinson's disease patients treated with mandibular implant overdentures. Clinical oral implants research, 11(6), 566–571.
https://doi.org/10.1034/j.1600-0501.2000.011006566.x

Tsai, E. S., Crohin, C. C., & Weber, H. P. (2000). A five-year evaluation of implants placed in extraction sockets. The Journal of the Western Society of Periodontology/Periodontal abstracts, 48(2), 37–47.

Russo, S. P., Fiorellini, J. P., Weber, H. P., & Niederman, R. (2000). Benchmarking the dental implant evidence on MEDLINE. The International journal of oral & maxillofacial implants, 15(6), 792–800.

Comut, A. A., Weber, H. P., Shortkroff, S., Cui, F. Z., & Spector, M. (2001). Connective tissue orientation around dental implants in a canine model. Clinical oral implants research, 12(5), 433–440.
https://doi.org/10.1034/j.1600-0501.2001.120502.x

Heckmann, S. M., Wichmann, M. G., Winter, W., Meyer, M., & Weber, H. (2001). Overdenture attachment selection and the loading of implant and denture‐bearing area. Part 1: In vivo verification of stereolithographic model. Clinical Oral Implants Research, 12(6), 617–623.
https://doi.org/10.1034/j.1600-0501.2001.120610.x

Heckmann, S. M., Wichmann, M. G., Winter, W., Meyer, M., & Weber, H. (2001b). Overdenture attachment selection and the loading of implant and denture-bearing area. Part 2: A methodical study using five types of attachment. Clinical Oral Implants Research, 12(6), 640–647.
https://doi.org/10.1034/j.1600-0501.2001.120613.x

Zoellner, A., Diemer, B., Weber, H. P., Stassinakis, A., & Gaengler, P. (2002). Histologic and radiographic assessment of caries-like lesions localized at the crown margin. The Journal of prosthetic dentistry, 88(1), 54–59.

Zoellner, A., Heuermann, M., Weber, H. P., & Gaengler, P. (2002). Secondary caries in crowned teeth: correlation of clinical and radiographic findings. The Journal of prosthetic dentistry, 88(3), 314–319.
https://doi.org/10.1067/mpr.2002.128122

Heckmann, S.E., Linke, J.J., Winter, W., and Weber, H.P.: Biomechanical aspects of implant supported overdentures. Ukranian J Dent 2003; 2:9-14.

Ishikawa‐Nagai, S., Terui, T., Ishibashi, K., Weber, H., & Ferguson, M. (2004). Prediction of optical efficacy of vital tooth bleaching using regression analysis. Color Research & Application, 29(5), 390–394.
https://doi.org/10.1002/col.20048

Heckmann, S. M., Schrott, A., Graef, F., Wichmann, M. G., & Weber, H. P. (2004). Mandibular two- implant telescopic overdentures. Clinical oral implants research, 15(5), 560–569.
https://doi.org/10.1111/j.1600-0501.2004.01064.x

Winter, W., Heckmann, S. M., & Weber, H. P. (2004). A time-dependent healing function for immediate loaded implants. Journal of biomechanics, 37(12), 1861–1867.
https://doi.org/10.1016/j.jbiomech.2004.02.033

Ishikawa-Nagai, S., Terui, T., Ishibashi, K., Weber, H. P., & Ferguson, M. (2004). Comparison of effectiveness of two 10% carbamide peroxide tooth-bleaching systems using spectrophotometric measurements. Journal of esthetic and restorative dentistry : official publication of the American Academy of Esthetic Dentistry ... [et al.], 16(6), 368–376.
https://doi.org/10.1111/j.1708- 8240.2004.tb00070.x

Ishikawa-Nagai, S., Ishibashi, K., Tsuruta, O., & Weber, H. P. (2005). Reproducibility of tooth color gradation using a computer color-matching technique applied to ceramic restorations. The Journal of prosthetic dentistry, 93(2), 129–137.
https://doi.org/10.1016/j.prosdent.2004.10.024

Kwon, K. R., Sachdeo, A., & Weber, H. P. (2005). Achieving immediate function with provisional prostheses after implant placement: a clinical report. The Journal of prosthetic dentistry, 93(6), 514–517.
https://doi.org/10.1016/j.prosdent.2005.04.002

Weber, H. P., Kim, D. M., Ng, M. W., Hwang, J. W., & Fiorellini, J. P. (2006). Peri-implant soft-tissue health surrounding cement- and screw-retained implant restorations: a multi-center, 3-year prospective study. Clinical oral implants research, 17(4), 375–379.
https://doi.org/10.1111/j.1600- 0501.2005.01232.x

Samet, N., Kwon, K. R., Good, P., & Weber, H. P. (2006). Voids and interlayer gaps in Class 1 posterior composite restorations: a comparison between a microlayer and a 2-layer technique. Quintessence international (Berlin, Germany : 1985), 37(10), 803–809.

Park, S. E., Weber, H. P., & Ishikawa-Nagai, S. (2006). Self-bonding polymers as surface coatings of restorative resins to prevent staining. The Journal of clinical dentistry, 17(5), 134–137.

Weber, H. P., & Sukotjo, C. (2007). Does the type of implant prosthesis affect outcomes in the partially edentulous patient?. The International journal of oral & maxillofacial implants, 22 Suppl, 140–172.

Lang, N. P., Tonetti, M. S., Suvan, J. E., Pierre Bernard, J., Botticelli, D., Fourmousis, I., Hallund, M., Jung, R., Laurell, L., Salvi, G. E., Shafer, D., Weber, H. P., & European Research Group on Periodontology (2007). Immediate implant placement with transmucosal healing in areas of aesthetic priority. A multicentre randomized-controlled clinical trial I. Surgical outcomes. Clinical oral implants research, 18(2), 188–196.
https://doi.org/10.1111/j.1600-0501.2006.01371.x

Nakajima, Y., Fiorellini, J. P., Kim, D. M., & Weber, H. P. (2007). Regeneration of standardized mandibular bone defects using expanded polytetrafluoroethylene membrane and various bone fillers. The International journal of periodontics & restorative dentistry, 27(2), 151–159.

Fiorellini, J. P., Kim, D. M., Nakajima, Y., & Weber, H. P. (2007). Osseointegration of titanium implants following guided bone regeneration using expanded polytetrafluoroethylene membrane and various bone fillers. The International journal of periodontics & restorative dentistry, 27(3), 287–294.

Park, S. E., Da Silva, J. D., Weber, H. P., & Ishikawa-Nagai, S. (2007). Optical phenomenon of peri- implant soft tissue. Part I. Spectrophotometric assessment of natural tooth gingiva and peri- implant mucosa. Clinical oral implants research, 18(5), 569–574.
https://doi.org/10.1111/j.1600- 0501.2007.01391.x

Ishikawa-Nagai, S., Da Silva, J. D., Weber, H. P., & Park, S. E. (2007). Optical phenomenon of peri- implant soft tissue. Part II. Preferred implant neck color to improve soft tissue esthetics. Clinical oral implants research, 18(5), 575–580.
https://doi.org/10.1111/j.1600-0501.2007.01390.x

Kim, D. M., Badovinac, R. L., Lorenz, R. L., Fiorellini, J. P., & Weber, H. P. (2008). A 10-year prospective clinical and radiographic study of one-stage dental implants. Clinical oral implants research, 19(3), 254–258.
https://doi.org/10.1111/j.1600-0501.2007.01479.x

Park, S. E., Blissett, R., Susarla, S. M., & Weber, H. P. (2008). Candida albicans adherence to surface- modified denture resin surfaces. Journal of prosthodontics : official journal of the American College of Prosthodontists, 17(5), 365–369.
https://doi.org/10.1111/j.1532-849X.2007.00292.x

Wright, R. F., Dunlop, R. A., Kim, F. M., Weber, H. P., & Donoff, R. B. (2008). A survey of deans: trends, challenges, and mentoring in prosthodontics. Part 2. Journal of prosthodontics : official journal of the American College of Prosthodontists, 17(2), 149–155.
https://doi.org/10.1111/j.1532- 849X.2007.00248.x

Leong, P., Afrow, J., Weber, H. P., & Howell, H. (2008). Attitudes toward patient safety standards inU.S. dental schools: a pilot study. Journal of dental education, 72(4), 431–437.

Buser, D., Bornstein, M. M., Weber, H. P., Grütter, L., Schmid, B., & Belser, U. C. (2008). Early implant placement with simultaneous guided bone regeneration following single-tooth extraction in the esthetic zone: a cross-sectional, retrospective study in 45 subjects with a 2- to 4-year follow-up. Journal of periodontology, 79(9), 1773–1781.
https://doi.org/10.1902/jop.2008.080071

Da Silva, J. D., Park, S. E., Weber, H. P., & Ishikawa-Nagai, S. (2008). Clinical performance of a newly developed spectrophotometric system on tooth color reproduction. The Journal of prosthetic dentistry, 99(5), 361–368.
https://doi.org/10.1016/S0022-3913(08)60083-9

Park, E. J., Kim, E. S., Weber, H. P., Wright, R. F., & Mooney, D. J. (2008). Improved bone healing by angiogenic factor-enriched platelet-rich plasma and its synergistic enhancement by bone morphogenetic protein-2. The International journal of oral & maxillofacial implants, 23(5), 818–826.

Buser, D., Chen, S. T., Weber, H. P., & Belser, U. C. (2008). Early implant placement following single- tooth extraction in the esthetic zone: biologic rationale and surgical procedures. The International journal of periodontics & restorative dentistry, 28(5), 441–451.

Buser, D., Bornstein, M. M., Weber, H. P., Grütter, L., Schmid, B., & Belser, U. C. (2008). Early implant placement with simultaneous guided bone regeneration following single-tooth extraction in the esthetic zone: a cross-sectional, retrospective study in 45 subjects with a 2- to 4-year follow-up. Journal of periodontology, 79(9), 1773–1781.
https://doi.org/10.1902/jop.2008.080071

Bornstein, M. M., Halbritter, S., Harnisch, H., Weber, H. P., & Buser, D. (2008). A retrospective analysis of patients referred for implant placement to a specialty clinic: indications, surgical procedures, and early failures. The International journal of oral & maxillofacial implants, 23(6), 1109–1116.

Belser, U. C., Grütter, L., Vailati, F., Bornstein, M. M., Weber, H., & Buser, D. (2008). Outcome evaluation of early placed maxillary anterior Single‐Tooth implants using Objective esthetic criteria: a Cross‐ Sectional, retrospective study in 45 patients with a 2‐ to 4‐Year Follow‐Up using pink and white esthetic scores. Journal of Periodontology, 80(1), 140–151.
https://doi.org/10.1902/jop.2009.080435

Gallucci, G. O., Doughtie, C. B., Hwang, J. W., Fiorellini, J. P., & Weber, H. (2009). Five‐year results of fixed implant‐supported rehabilitations with distal cantilevers for the edentulous mandible. Clinical Oral Implants Research, 20(6), 601–607.
https://doi.org/10.1111/j.1600-0501.2008.01699.x

Lambert, F. E., Weber, H., Susarla, S. M., Belser, U. C., & Gallucci, G. O. (2009). Descriptive analysis of implant and prosthodontic survival rates with Fixed Implant–Supported rehabilitations in the edentulous maxilla. Journal of Periodontology, 80(8), 1220–1230.
https://doi.org/10.1902/jop.2009.090109

Schrott, A. R., Jimenez, M., Hwang, J., Fiorellini, J., & Weber, H. (2009). Five‐year evaluation of the influence of keratinized mucosa on peri‐implant soft‐tissue health and stability around implants supporting full‐arch mandibular fixed prostheses. Clinical Oral Implants Research, 20(10), 1170–1177.
https://doi.org/10.1111/j.1600-0501.2009.01795.x

Wittneben, J. G., Zöllner, A., Wright, A. F., & Weber, H. P. (2009). Comparison of visual-tactile, radiographic, and histologic diagnoses of subgingival crown margin caries- an in vitro study. The International journal of prosthodontics, 22(6), 561–565.

Yamano, S., Berley, J. A., Kuo, W. P., Gallucci, G. O., Weber, H. P., & Sukotjo, C. (2010). Effects of nicotine on gene expression and osseointegration in rats. Clinical oral implants research, 21(12), 1353–1359.
https://doi.org/10.1111/j.1600-0501.2010.01955.x

Sherif, S., Susarla, S. M., Hwang, J. W., Weber, H. P., & Wright, R. F. (2011). Clinician- and patient- reported long-term evaluation of screw- and cement-retained implant restorations: a 5-year prospective study. Clinical oral investigations, 15(6), 993–999.
https://doi.org/10.1007/s00784-010- 0460-4

Jun, S. H., Chang, B. M., Weber, H. P., & Kwon, J. J. (2010). Comparison of initial stability parameters and histomorphometric analysis of implants inserted into extraction sockets: human fresh cadaver study. The International journal of oral & maxillofacial implants, 25(5), 985–990.

Yamano, S., Al-Sowygh, Z. H., Gallucci, G. O., Wada, K., Weber, H. P., & Sukotjo, C. (2011). Early peri- implant tissue reactions on different titanium surface topographies. Clinical oral implants research, 22(8), 815–819.
https://doi.org/10.1111/j.1600-0501.2010.02059.x

Cochran, D. L., Jackson, J. M., Jones, A. A., Jones, J. D., Kaiser, D. A., Taylor, T. D., Weber, H. P., Higginbottom, F. L., Richardson, J. R., & Oates, T. (2011). A 5-year prospective multicenter clinical trial of non-submerged dental implants with a titanium plasma-sprayed surface in 200 patients. Journal of periodontology, 82(7), 990–999. https://doi.org/10.1902/jop.2011.100464

Gallucci, G. O., Papaspyridakos, P., Ashy, L. M., Kim, G. E., Brady, N. J., & Weber, H. P. (2011). Clinical accuracy outcomes of closed-tray and open-tray implant impression techniques for partially edentulous patients. The International journal of prosthodontics, 24(5), 469–472.

Papaspyridakos, P., Lal, K., White, G. S., Weber, H. P., & Gallucci, G. O. (2011). Effect of splinted and nonsplinted impression techniques on the accuracy of fit of fixed implant prostheses in edentulous patients: a comparative study. The International journal of oral & maxillofacial implants, 26(6), 1267– 1272.

Papaspyridakos, P., Chen, C. J., Singh, M., Weber, H. P., & Gallucci, G. O. (2012). Success criteria in implant dentistry: a systematic review. Journal of dental research, 91(3), 242–248.
https://doi.org/10.1177/0022034511431252

Papaspyridakos, P., Chen, C. J., Chuang, S. K., Weber, H. P., & Gallucci, G. O. (2012). A systematic review of biologic and technical complications with fixed implant rehabilitations for edentulous patients. The International journal of oral & maxillofacial implants, 27(1), 102–110.

Benic, G. I., Mokti, M., Chen, C., Weber, H., Hämmerle, C. H. F., & Gallucci, G. O. (2011). Dimensions of buccal bone and mucosa at immediately placed implants after 7 years: a clinical and cone beam computed tomography study. Clinical Oral Implants Research, 23(5), 560–566.
https://doi.org/10.1111/j.1600-0501.2011.02253.x

Pjetursson, B. E., Helbling, C., Weber, H., Matuliene, G., Salvi, G. E., Brägger, U., Schmidlin, K., Zwahlen, M., & Lang, N. P. (2012). Peri‐implantitis susceptibility as it relates to periodontal therapy and supportive care. Clinical Oral Implants Research, 23(7), 888–894.
https://doi.org/10.1111/j.1600- 0501.2012.02474.x

Gallucci, G. O., Weber, H. P., & Kalenderian, E. (2012). Implementation of a new advanced graduate education program in oral implantology. Journal of dental education, 76(10), 1347–1357.

Chen, C., Papaspyridakos, P., Guze, K., Singh, M., Weber, H., & Gallucci, G. O. (2013). Effect of misfit of Cement-Retained implant single crowns on crestal bone changes. The International Journal of Prosthodontics, 26(2), 135–137.
https://doi.org/10.11607/ijp.3137

Gallucci, G. O., Benic, G., Eckert, S. E., Papaspyridakos, P., Schimmel, M., Schrott, A., & Weber, H. (2014). Consensus statements and clinical recommendations for implant loading protocols. The International Journal of Oral & Maxillofacial Implants, 29(Supplement), 287–290.
https://doi.org/10.11607/jomi.2013.g4

Ioannidis, A., Gallucci, G. O., Jung, R. E., Borzangy, S., Hämmerle, C. H. F., & Benic, G. I. (2015). Titanium‐zirconium narrow‐diameter versus titanium regular‐diameter implants for anterior and premolar single crowns: 3‐year results of a randomized controlled clinical study. Journal of Clinical Periodontology, 42(11), 1060–1070.
https://doi.org/10.1111/jcpe.12468

Kwon, Y., Choi, H., Lee, H., Lee, J., Weber, H., & Pae, A. (2014). Cellular viability and genetic expression of human gingival fibroblasts to zirconia with enamel matrix derivative (Emdogain®). The Journal of Advanced Prosthodontics, 6(5), 406.
https://doi.org/10.4047/jap.2014.6.5.406

Papaspyridakos, P., Chen, C., Chuang, S., & Weber, H. (2014). Implant Loading Protocols for Edentulous Patients with Fixed Prostheses: A Systematic Review and Meta-Analysis. The International Journal of Oral & Maxillofacial Implants, 29(Supplement), 256–270.
https://doi.org/10.11607/jomi.2014suppl.g4.3

Papaspyridakos, P., Chen, C., Gallucci, G., Doukoudakis, A., Weber, H., & Chronopoulos, V. (2014). Accuracy of implant impressions for partially and completely edentulous patients: a Systematic review. The International Journal of Oral & Maxillofacial Implants, 29(4), 836–845.
https://doi.org/10.11607/jomi.3625

Papaspyridakos, P., Hirayama, H., Chen, C., Ho, C., Chronopoulos, V., & Weber, H. (2015). Full‐arch implant fixed prostheses: a comparative study on the effect of connection type and impression technique on accuracy of fit. Clinical Oral Implants Research, 27(9), 1099–1105.
https://doi.org/10.1111/clr.12695

Rieder, D., Eggert, J., Krafft, T., Weber, H., Wichmann, M. G., & Heckmann, S. M. (2014). Impact of placement and restoration timing on single‐implant esthetic outcome – a randomized clinical trial. Clinical Oral Implants Research, 27(2).
https://doi.org/10.1111/clr.12539

Zou, H., Zhao, X., Sun, N., Zhang, S., Sato, T., Yu, H., Chen, Q., Weber, H., Dard, M., Yuan, Q., & Lanske, B. (2013). Effect of chronic kidney disease on the healing of titanium implants. Bone, 56(2), 410–415.
https://doi.org/10.1016/j.bone.2013.07.014

Amin, S., Weber, H. P., Finkelman, M., Rafie, K. E., Kudara, Y., & Papaspyridakos, P. (2016). Digital vs. conventional full‐arch implant impressions: a comparative study. Clinical Oral Implants Research, 28(11), 1360–1367.
https://doi.org/10.1111/clr.12994

Marghalani, A., Weber, H., Finkelman, M., Kudara, Y., Rafie, K. E., & Papaspyridakos, P. (2017). Digital versus conventional implant impressions for partially edentulous arches: An evaluation of accuracy. Journal of Prosthetic Dentistry, 119(4), 574–579.
https://doi.org/10.1016/j.prosdent.2017.07.002

Papaspyridakos, P., Amin, S., El‐Rafie, K., & Weber, H. (2016). Technique to Match Gingival Shade when Using Pink Ceramics for Anterior Fixed Implant Prostheses. Journal of Prosthodontics, 27(3), 311–313.
https://doi.org/10.1111/jopr.12483

Papaspyridakos, P., Kang, K., DeFuria, C., Amin, S., Kudara, Y., & Weber, H. (2017). Digital workflow in full‐arch implant rehabilitation with segmented minimally veneered monolithic zirconia fixed dental prostheses: 2‐year clinical follow‐up. Journal of Esthetic and Restorative Dentistry, 30(1), 5–13.
https://doi.org/10.1111/jerd.12323

Papaspyridakos, P., Kim, Y., Finkelman, M., El‐Rafie, K., & Weber, H. (2016). Digital evaluation of three splinting materials used to fabricate verification jigs for Full‐Arch implant prostheses: a comparative study. Journal of Esthetic and Restorative Dentistry, 29(2), 102–109.
https://doi.org/10.1111/jerd.12274

Papaspyridakos, P., Rajput, N., Kudara, Y., & Weber, H. (2017). Digital workflow for fixed implant rehabilitation of an extremely atrophic edentulous mandible in three appointments. Journal of Esthetic and Restorative Dentistry, 29(3), 178–188.
https://doi.org/10.1111/jerd.12290

Shembesh, M., Ali, A., Finkelman, M., Weber, H., & Zandparsa, R. (2016). An in vitro comparison of the marginal adaptation accuracy of CAD/CAM restorations using different impression systems. Journal of Prosthodontics, 26(7), 581–586.
https://doi.org/10.1111/jopr.12446

Tsaousoglou, P., Michalakis, K., Kang, K., Weber, H., & Sculean, A. (2016). The effect of rigid and non‐ rigid connections between implants and teeth on biological and technical complications: a systematic review and a meta‐analysis. Clinical Oral Implants Research, 28(7), 849–863.
https://doi.org/10.1111/clr.12890

Wittneben, J., Joda, T., Weber, H., & Brägger, U. (2016). Screw retained vs. cement retained implant‐ supported fixed dental prosthesis. Periodontology 2000, 73(1), 141–151.
https://doi.org/10.1111/prd.12168

Alshawaf, B., Weber, H., Finkelman, M., Rafie, K. E., Kudara, Y., & Papaspyridakos, P. (2018). Accuracy of printed casts generated from digital implant impressions versus stone casts from conventional implant impressions: A comparative in vitro study. Clinical Oral Implants Research, 29(8), 835–842.
https://doi.org/10.1111/clr.13297

Bonino, F., Steffensen, B., Natto, Z., Hur, Y., Holtzman, L. P., & Weber, H. (2018). Prospective study of the impact of peri‐implant soft tissue properties on patient‐reported and clinically assessed outcomes. Journal of Periodontology, 89(9), 1025–1032.
https://doi.org/10.1002/j per.18-0031

Jung, R. E., Al‐Nawas, B., Araujo, M., Avila‐Ortiz, G., Barter, S., Brodala, N., Chappuis, V., Chen, B., De Souza, A., Almeida, R. F., Fickl, S., Finelle, G., Ganeles, J., Gholami, H., Hammerle, C., Jensen, S., Jokstad, A., Katsuyama, H., Kleinheinz, J., . . . Windisch, P. (2018). Group 1 ITI Consensus Report: The influence of implant length and design and medications on clinical and patient‐reported outcomes. Clinical Oral Implants Research, 29(S16), 69–77.
https://doi.org/10.1111/clr.13342

Papaspyridakos, P., Bordin, T. B., Kim, Y., DeFuria, C., Pagni, S. E., Chochlidakis, K., Teixeira, E. R., & Weber, H. (2018). Implant survival rates and biologic complications with implant‐supported fixed complete dental prostheses: A retrospective study with up to 12‐year follow‐up. Clinical Oral Implants Research, 29(8), 881–893.
https://doi.org/10.1111/clr.13340

Papaspyridakos, P., Bordin, T. B., Natto, Z. S., Kim, Y., El‐Rafie, K., Tsigarida, A., Chochlidakis, K., & Weber, H. (2019). Double Full‐Arch Fixed Implant‐Supported Prostheses: Outcomes and Complications after a Mean Follow‐Up of 5 Years. Journal of Prosthodontics, 28(4), 387–397.
https://doi.org/10.1111/jopr.13040

Papaspyridakos, P., De Souza, A., Vazouras, K., Gholami, H., Pagni, S., & Weber, H. (2018). Survival rates of short dental implants (≤6 mm) compared with implants longer than 6 mm in posterior jaw areas: A meta‐analysis. Clinical Oral Implants Research, 29(S16), 8–20.
https://doi.org/10.1111/clr.13289

Malament, K. A., Natto, Z. S., Thompson, V., Rekow, D., Eckert, S., & Weber, H. (2019). Ten-year survival of pressed, acid-etched e.max lithium disilicate monolithic and bilayered complete-coverage restorations: Performance and outcomes as a function of tooth position and age. Journal of Prosthetic Dentistry, 121(5), 782–790.
https://doi.org/10.1016/j.prosdent.2018.11.024

Papaspyridakos, P., Bordin, T. B., Kim, Y., El‐Rafie, K., Pagni, S. E., Natto, Z. S., Teixeira, E. R., Chochlidakis, K., & Weber, H. (2019). Technical Complications and Prosthesis Survival Rates with Implant‐Supported Fixed Complete Dental Prostheses: A Retrospective Study with 1‐ to 12‐Year Follow‐Up. Journal of Prosthodontics, 29(1), 3–11.
https://doi.org/10.1111/jopr.13119

Papaspyridakos, P., Bordin, T. B., Natto, Z. S., El-Rafie, K., Pagni, S. E., Chochlidakis, K., Ercoli, C., & Weber, H. (2019). Complications and survival rates of 55 metal-ceramic implant-supported fixed complete-arch prostheses: A cohort study with mean 5-year follow-up. Journal of Prosthetic Dentistry, 122(5), 441–449.
https://doi.org/10.1016/j.prosdent.2019.01.022

Papaspyridakos, P., Chen, Y., Alshawaf, B., Kang, K., Finkelman, M., Chronopoulos, V., & Weber, H. (2020). Digital workflow: In vitro accuracy of 3D printed casts generated from complete-arch digital implant scans. Journal of Prosthetic Dentistry, 124(5), 589–593.
https://doi.org/10.1016/j.prosdent.2019.10.029

Vazouras, K., De Souza, A. B., Gholami, H., Papaspyridakos, P., Pagni, S., & Weber, H. (2019). Effect of time in function on the predictability of short dental implants (≤6 mm): A meta‐analysis. Journal of Oral Rehabilitation, 47(3), 403–415.
https://doi.org/10.1111/joor.12925

Papaspyridakos, P., Chochlidakis, K., Kang, K., Chen, Y., Alghfeli, A., Kudara, Y., & Weber, H. (2020). Digital Workflow for Implant Rehabilitation with Double Full‐Arch Monolithic Zirconia Prostheses. Journal of Prosthodontics, 29(6), 460–465.
https://doi.org/10.1111/jopr.13166

Yehuda, D. B., Weber, H., Finkelman, M., Sicilia, E., Muftu, A., Chochlidakis, K., & Papaspyridakos, P. (2020). Accuracy of guided implant surgery in 25 edentulous arches: a laboratory observational study. Journal of Prosthodontics, 29(8), 718–724.
https://doi.org/10.1111/jopr.13224

Chen, Y., Finkelman, M., Papaspirisdakos, P., César-Neto, J. B., Weber, H. P., & De Souza, A. B. (2020). Comparative analysis of dimensional alterations following extraction of maxillary molars using three-dimensional images’ superimposition: a CBCT study. Odontology, 109(2), 514–523.
https://doi.org/10.1007/s10266-020-00568-y

Marinis, A., Papaspyridakos, P., Sicilia, E., Bernardes, S. R., Touloumi, F., Chochlidakis, K., & Weber, H. (2021). Digital workflow for double complete arch zirconia prostheses utilizing a novel scan body. Journal of Prosthodontics, 31(1), 4–8.
https://doi.org/10.1111/jopr.13417

Vazouras, K., Gholami, H., Margvelashvili‐Malament, M., Kim, Y. J., Finkelman, M., & Weber, H. (2022). An esthetic evaluation of different abutment materials in the anterior maxilla: a randomized controlled clinical trial using a crossover design. Journal of Prosthodontics, 31(8), 673–680.
https://doi.org/10.1111/jopr.13520

De Souza, A. B., Papaspyridakos, P., Weber, H., Vazouras, K., & Matarazzo, F. (2023). Effect of dental implant therapy on the preservation of orofacial tissues: A systematic review and meta‐analysis. Clinical Oral Implants Research, 34(S26), 240–256.
https://doi.org/10.1111/clr.14106

Schimmel, M., Araujo, M., Abou‐Ayash, S., Buser, R., Ebenezer, S., Fonseca, M., Heitz‐Mayfield, L. J., Holtzman, L. P., Kamnoedboon, P., Levine, R., McKenna, G., Maniewicz, S., Matarazzo, F., Mattheos, N., Papaspyridakos, P., De Souza, A. B., Srinivasan, M., Stilwell, C., & Weber, H. P. (2023). Group 4 ITI Consensus Report: Patient benefits following implant treatment in partially and fully edentulous patients. Clinical Oral Implants Research, 34(S26), 257–265.
https://doi.org/10.1111/clr.14145

Yousef, H., Harris, B. T., Elathamna, E. N., Morton, D., & Lin, W. (2021). Effect of additive manufacturing process and storage condition on the dimensional accuracy and stability of 3D-printed dental casts. Journal of Prosthetic Dentistry, 128(5), 1041–1046.
https://doi.org/10.1016/j.prosdent.2021.02.028

Chavez, M. G., Yu, W., Biehs, B., Harada, H., Snead, M. L., Lee, J. S., Desai, T. A., & Klein, O. D. (2012). Characterization of Dental Epithelial Stem Cells from the Mouse Incisor with Two-Dimensional and Three-Dimensional Platforms. Tissue Engineering Part C Methods, 19(1), 15–24.
https://doi.org/10.1089/ten.tec.2012.0232

Yu, W., Park, C., & Shimel, B. (2020). Oral manifestations and clinical progression of a rare double-hit B-cell lymphoma: a case report and review of the literature. Oral Surgery Oral Medicine Oral Pathology and Oral Radiology, 130(2), e38–e43.
https://doi.org/10.1016/j.oooo.2019.12.004

Steadman, R., & Yun, S. (2003). Practice guidelines for adult sedation and analgesia. In Humana Press eBooks (pp. 53–76).

Yun, S., Martin-Orr, N., & Hendrix, M. (2024). Dental sedation permit requirements for physician anesthesiologists in the United States and the European Union: a review. Current Opinion in Anaesthesiology.
https://doi.org/10.1097/aco.0000000000001442

Yun, S. (2018, October). Anesthesia Breakout: Myths and Cognitive Errors in Dental Anesthesia: Avoiding Office Crises. In 100th AAOMS Annual Meeting, Scientific Sessions and Exhibition. AAOMS.

Ashtiani, R. E., Tehrani, S., Revilla‐León, M., & Zandinejad, A. (2020). Reducing the risk of COVID‐19 transmission in dental offices: a review. Journal of Prosthodontics, 29(9), 739–745.
https://doi.org/10.1111/jopr.13261

Beyabanaki, E., Ashtiani, R. E., Feyzi, M., & Zandinejad, A. (2021). Evaluation of Microshear Bond Strength of Four Different CAD‐CAM Polymer‐Infiltrated Ceramic Materials after Thermocycling. Journal of Prosthodontics, 31(7), 623–628.
https://doi.org/10.1111/jopr.13469

Beyabanaki, E., Ashtiani, R. E., Moradi, M., Namdari, M., Mostafavi, D., & Zandinejad, A. (2022). Biaxial flexural strength and Weibull characteristics of a resin ceramic material after thermal‐cycling.Journal of Prosthodontics, 32(8), 721–727.
https://doi.org/10.1111/jopr.13622

Khanlar, L. N., Francis, C., Barmak, A. B., Rios, A. L. S., Ashtiani, R. E., & Zandinejad, A. (2023). Effect of a new support design on the marginal and internal gap of additively manufactured interim crowns using direct light deposition technology. Journal of Prosthodontics, 33(2), 188–194.
https://doi.org/10.1111/jopr.13668

Miyanaji, H., Zhang, S., Lassell, A., Zandinejad, A., & Yang, L. (2016). Process Development of Porcelain Ceramic Material with Binder Jetting Process for Dental Applications. JOM, 68(3), 831–841.
https://doi.org/10.1007/s11837-015-1771-3

Mostafavi, D., Methani, M. M., Piedra‐Cascón, W., Zandinejad, A., & Revilla‐León, M. (2020). Influence of the rinsing postprocessing procedures on the manufacturing accuracy of VAT‐Polymerized dental model material. Journal of Prosthodontics, 30(7), 610–616.
https://doi.org/10.1111/jopr.13288

Najafi, A., Ashraghi, M., Chou, J., Morton, D., & Zandinejad, A. (2016). Survival of cast-metal, resin- bonded fixed partial dental prostheses after nearly 20-year follow-up: A retrospective study. Journal of Prosthetic Dentistry, 116(4), 507–515.
https://doi.org/10.1016/j.prosdent.2016.02.021

Revilla-León, M., Methani, M. M., Morton, D., & Zandinejad, A. (2020). Internal and marginal discrepancies associated with stereolithography (SLA) additively manufactured zirconia crowns. Journal of Prosthetic Dentistry, 124(6), 730–737.
https://doi.org/10.1016/j.prosdent.2019.09.018

Revilla-León, M., Meyer, M. J., Barrington, J. J., Sones, A., Umorin, M. P., Taleghani, M., & Zandinejad, A. (2019). Perception of occlusal plane that is nonparallel to interpupillary and commissural lines but with the maxillary dental midline ideally positioned. Journal of Prosthetic Dentistry, 122(5), 482–490.
https://doi.org/10.1016/j.prosdent.2019.01.023

Revilla‐León, M., Meyers, M. J., Zandinejad, A., & Özcan, M. (2018). A review on chemical composition, mechanical properties, and manufacturing work flow of additively manufactured current polymers for interim dental restorations. Journal of Esthetic and Restorative Dentistry, 31(1), 51–57.
https://doi.org/10.1111/jerd.12438

Zandinejad, A., Das, O., Barmak, A. B., Kuttolamadom, M., & Revilla‐León, M. (2021). The Flexural Strength and Flexural Modulus of Stereolithography Additively Manufactured Zirconia with Different Porosities. Journal of Prosthodontics, 31(5), 434–440.
https://doi.org/10.1111/jopr.13430

Zandinejad, A., Floriani, F., Lin, W., & Naimi‐Akbar, A. (2024). Clinical outcomes of milled, 3D‐printed, and conventional complete dentures in edentulous patients: A systematic review and meta‐ analysis. Journal of Prosthodontics.
https://doi.org/10.1111/jopr.13859

Zandinejad, A., Khanlar, L. N., Barmak, A. B., Ikeda, M., Tagami, J., & Masri, R. (2023). Shear bond strength of porcelain to milled and stereolithography additively manufactured zirconia with and without surface treatment: An in vitro study. Journal of Prosthetic Dentistry.
https://doi.org/10.1016/j.prosdent.2023.02.007

Zandinejad, A., Khanlar, L. N., Barmak, A. B., Tagami, J., & Revilla‐León, M. (2022). Surface Roughness and Bond Strength of Resin Composite to Additively Manufactured Zirconia with Different Porosities. Journal of Prosthodontics, 31(S1), 97–104.
https://doi.org/10.1111/jopr.13434

Zandinejad, A., Khurana, S., Liang, Y., & Liu, X. (2023). Comparative evaluation of gingival fibroblast growth on 3D‐printed and milled zirconia: An in vitro study. Journal of Prosthodontics, 33(1), 54–60.
https://doi.org/10.1111/jopr.13650

Zandinejad, A., Methani, M. M., Schneiderman, E. D., Revilla‐León, M., & Bds, D. M. (2019). Fracture Resistance of Additively Manufactured Zirconia Crowns when Cemented to Implant Supported Zirconia Abutments: An in vitro Study. Journal of Prosthodontics, 28(8), 893–897.
https://doi.org/10.1111/jopr.13103

Zandinejad, A., Metz, M., Stevens, P., Lin, W., & Morton, D. (2015). Virtually designed and CAD/CAM- fabricated lithium disilicate prostheses for an esthetic maxillary rehabilitation: A senior dental student clinical report. Journal of Prosthetic Dentistry, 113(4), 282–288.
https://doi.org/10.1016/j.prosdent.2014.10.003

Zandinejad, A., & Revilla‐León, M. (2021). Additively Manufactured Dental Crown with Color Gradient and Graded Structure: A Technique Report. Journal of Prosthodontics, 30(9), 822–825.
https://doi.org/10.1111/jopr.13410

Zandinejad, A., Zadeh, R. S., Khanlar, L. N., Barmak, A. B., & Revilla‐León, M. (2024). Fracture resistance, marginal and internal adaptation of innovative 3D‐printed graded structure crown using a 3D jet printing technology. Journal of Prosthodontics.
https://doi.org/10.1111/jopr.13895

Abdel-Azim, T., Zandinejad, A., Elathamna, E., Lin, W., & Morton, D. (2014). The influence of digital fabrication options on the accuracy of dental Implant–Based single units and Complete-Arch frameworks. The International Journal of Oral & Maxillofacial Implants, 29(6), 1281–1288.
https://doi.org/10.11607/jomi.3577

Abdel-Azim, T., Zandinejad, A., Metz, M., & Morton, D. (2015). Maxillary and mandibular rehabilitation in the esthetic zone using a digital impression technique and CAD/CAM-fabricated prostheses: a multidisciplinary clinical report. Operative Dentistry, 40(4), 350–356.
https://doi.org/10.2341/13-286-t

Amin, S. A., Hann, S., Elsheikh, A. K., Boltchi, F., & Zandinejad, A. (2022). A complete digital approach for facially generated full arch diagnostic wax up, guided surgery, and implant‐supported interim prosthesis by integrating 3D facial scanning, intraoral scan and CBCT. Journal of Prosthodontics, 32(1), 90–93.
https://doi.org/10.1111/jopr.13605

EftekharAshtiani, R., Beyabanaki, E., Razmgah, M., Salazar, A., Revilla-León, M., & Zandinejad, A. (2023). Color stability of resin hybrid ceramic materials in comparison to Zirconia-Reinforced lithium silicate ceramic. Frontiers in Dentistry.
https://doi.org/10.18502/fid.v20i37.13742

Gonzalez, A. M., Piedra‐Cascón, W., Zandinejad, A., & Revilla‐León, M. (2020). Fiber‐reinforced composite fixed dental prosthesis using an additive manufactured silicone index. Journal of Esthetic and Restorative Dentistry, 32(7), 626–633.
https://doi.org/10.1111/jerd.12628

Revilla‐León, M., Ashby, M. T., Meyer, M. J., Umorin, M., Barrington, J. J., & Zandinejad, A. (2020). Layperson and dental professional perception when evaluating their own virtually 2D or 3D simulated esthetic discrepancies. Journal of Prosthodontics, 29(6), 466–471.
https://doi.org/10.1111/jopr.13182

Revilla-León, M., Campbell, H. E., Meyer, M. J., Umorin, M., Sones, A., & Zandinejad, A. (2020). Esthetic dental perception comparisons between 2D- and 3D-simulated dental discrepancies. Journal of Prosthetic Dentistry, 124(6), 763–773.
https://doi.org/10.1016/j.prosdent.2019.11.015

Revilla-León, M., Raney, L., Piedra-Cascón, W., Barrington, J., Zandinejad, A., & Özcan, M. (2019). Digital workflow for an esthetic rehabilitation using a facial and intraoral scanner and an additive manufactured silicone index: A dental technique. Journal of Prosthetic Dentistry, 123(4), 564–570.
https://doi.org/10.1016/j.prosdent.2019.03.014

Zandinejad, A., Lin, W., Atarodi, M., Abdel-Azim, T., Metz, M., & Morton, D. (2015). Digital workflow for virtually designing and milling ceramic lithium disilicate veneers: a clinical report. Operative Dentistry, 40(3), 241–246.
https://doi.org/10.2341/13-291-s

Zandinejad, A., Revilla-León, M., Methani, M. M., Khanlar, L. N., & Morton, D. (2021). The Fracture Resistance of Additively Manufactured Monolithic Zirconia vs. Bi-Layered Alumina Toughened Zirconia Crowns When Cemented to Zirconia Abutments. Evaluating the Potential of 3D Printing of Ceramic Crowns: An In Vitro Study. Dentistry Journal, 9(10), 115.
https://doi.org/10.3390/dj9100115

Khanlar, L. N., Barmak, A. B., Oh, Y., Mendha, U., Yared, S., & Zandinejad, A. (2023). Marginal and internal discrepancies associated with carbon digital light synthesis additively manufactured interim crowns. Journal of Prosthetic Dentistry, 130(1), 108.e1-108.e6.
https://doi.org/10.1016/j.prosdent.2023.04.007

Khanlar, L. N., Rios, A. S., Tahmaseb, A., & Zandinejad, A. (2021). Additive manufacturing of zirconia ceramic and its application in clinical dentistry: a review. Dentistry Journal, 9(9), 104.
https://doi.org/10.3390/dj9090104

Lin, W., Harris, B. T., Zandinejad, A., & Morton, D. (2013). Use of digital data acquisition and CAD/CAM technology for the fabrication of a fixed complete dental prosthesis on dental implants. Journal of Prosthetic Dentistry, 111(1), 1–5.
https://doi.org/10.1016/j.prosdent.2013.04.010

Methani, M. M., Revilla‐León, M., & Zandinejad, A. (2019). The potential of additive manufacturing technologies and their processing parameters for the fabrication of all‐ceramic crowns: A review. Journal of Esthetic and Restorative Dentistry, 32(2), 182–192.
https://doi.org/10.1111/jerd.12535

Mosier, M., Barmak, B., Gómez-Polo, M., Zandinejad, A., & Revilla-León, M. (2021). Digital and Analog vertical dimension Measurements: A clinical observational study. The International Journal of Prosthodontics, 34(4), 419–427.
https://doi.org/10.11607/ij p.7270

Mostafavi, D., Methani, M., Piedra-Cascón, W., Zandinejad, A., Att, W., & Revilla-León, M. (2021). Influence of polymerization postprocessing procedures on the accuracy of additively manufactured dental model material. The International Journal of Prosthodontics, 36(4), 479–485.
https://doi.org/10.11607/ij p.7349

Park, S. H., Piedra‐Cascón, W., Zandinejad, A., & Revilla‐León, M. (2020). Digitally created 3‐Piece Additive manufactured index for direct esthetic treatment. Journal of Prosthodontics, 29(5), 436–442.
https://doi.org/10.1111/jopr.13159

Revilla-León, M., Ashby, M. T., Meyer, M. J., Zandinejad, A., & Umorin, M. (2021). Self-perception and self-representation preference between 2-dimensional and 3-dimensional facial reconstructions among dentists, dental students, and laypersons. Journal of Prosthetic Dentistry, 127(6), 911–917.
https://doi.org/10.1016/j.prosdent.2020.11.034

Revilla‐León, M., Fountain, J., Cascón, W. P., Özcan, M., & Zandinejad, A. (2019). Workflow description of additively manufactured clear silicone indexes for injected provisional restorations: A novel technique. Journal of Esthetic and Restorative Dentistry, 31(3), 213–221.
https://doi.org/10.1111/jerd.12464

Revilla-León, M., & Zandinejad, A. (2021). Two-layer additively manufactured crown: Proof of concept.Journal of Dentistry, 112, 103730.
https://doi.org/10.1016/j.jdent.2021.103730

Abdel-Azim, T., Rogers, K., Elathamna, E., Zandinejad, A., Metz, M., & Morton, D. (2015a). Comparison of the marginal fit of lithium disilicate crowns fabricated with CAD/CAM technology by using conventional impressions and two intraoral digital scanners. Journal of Prosthetic Dentistry, 114(4), 554–559.
https://doi.org/10.1016/j.prosdent.2015.04.001

Abdel-Azim, T., Rogers, K., Elathamna, E., Zandinejad, A., Metz, M., & Morton, D. (2015b). Comparison of the marginal fit of lithium disilicate crowns fabricated with CAD/CAM technology by using conventional impressions and two intraoral digital scanners. Journal of Prosthetic Dentistry, 114(4), 554–559.
https://doi.org/10.1016/j.prosdent.2015.04.001

Alfaraj, A., Khanlar, L. N., Lin, W., & Zandinejad, A. (2023). Exploring the impact of the extent of the partially edentulous area on the accuracy of two intraoral scanners. Journal of Prosthetic Dentistry, 131(1), 163.e1-163.e8.
https://doi.org/10.1016/j.prosdent.2023.10.002

Chun, S., Hann, S., Khanlar, L. N., & Zandinejad, A. (2022). Computer-aided design and additively manufactured resin-bonded framework to retain an existing ceramic crown as the interim restoration after extraction: A dental technique. Journal of Prosthetic Dentistry, 132(1), 42–45.
https://doi.org/10.1016/j.prosdent.2022.05.031

Khanlar, L. N., Abdou, A., Takagaki, T., Mori, S., Ikeda, M., Nikaido, T., Zandinejad, A., & Tagami, J. (2021). The effects of different silicatization and silanization protocols on the bond durability of resin cements to new high-translucent zirconia. Clinical Oral Investigations, 26(4), 3547–3561.
https://doi.org/10.1007/s00784-021-04323-7

Khanlar, L. N., Revilla-León, M., Barmak, A. B., Ikeda, M., Alsandi, Q., Tagami, J., & Zandinejad, A. (2021). Surface roughness and shear bond strength to composite resin of additively manufactured interim restorative material with different printing orientations. Journal of Prosthetic Dentistry, 129(5), 788– 795.
https://doi.org/10.1016/j.prosdent.2021.08.010

Lin, W., Harris, B. T., Zandinejad, A., Martin, W. C., & Morton, D. (2013). Use of prefabricated titanium abutments and customized anatomic lithium disilicate structures for cement-retained implant restorations in the esthetic zone. Journal of Prosthetic Dentistry, 111(3), 181–185.
https://doi.org/10.1016/j.prosdent.2013.07.013

Lin, W., Starr, T. L., Harris, B. T., Zandinejad, A., & Morton, D. (2013). Additive Manufacturing Technology (Direct Metal laser sintering) as a novel approach to fabricate functionally graded titanium implants: Preliminary investigation of fabrication parameters. The International Journal of Oral & Maxillofacial Implants, 28(6), 1490–1495.
https://doi.org/10.11607/jomi.3164

Lin, W., Zandinejad, A., Metz, M., Harris, B., & Morton, D. (2015). Predictable restorative work flow for Computer-Aided Design/Computer-Aided Manufacture–Fabricated ceramic veneers utilizing a virtual Smile design principle. Operative Dentistry, 40(4), 357–363.
https://doi.org/10.2341/13-295-s

Metz, M. J., Abdel‐Azim, T., Miller, C. J., Lin, W., ZandiNejad, A., Oliveira, G. M., & Morton, D. (2014). Implementation of a laboratory quality assurance program: the Louisville Experience. Journal of Dental Education, 78(2), 195–205.
https://doi.org/10.1002/j.0022-0337.2014.78.2.tb05670.x

Metz, M. J., Miller, C. J., Lin, W. S., Abdel‐Azim, T., Zandinejad, A., & Crim, G. A. (2014). Dental student perception and assessment of their clinical knowledge in educating patients about preventive dentistry. European Journal of Dental Education, 19(2), 81–86.
https://doi.org/10.1111/eje.12107

Metz, M., Lin, W., Miller, C., ZandiNejad, A., Abdel-Azim, T., & Morton, D. (2014). Resources for a novel laboratory quality assurance program: Operating procedures. MedEdPORTAL.
https://doi.org/10.15766/mep_2374-8265.9865

Revilla-León, M., Abaei, D. S., Tittle, A., & Zandinejad, A. (2021). Additively manufactured implant abutment screw-access guide to remove a cement-retained implant crown: A technique. Journal of Prosthetic Dentistry, 127(2), 219–222.
https://doi.org/10.1016/j.prosdent.2020.11.019

Revilla-León, M., Fogarty, R., Barrington, J. J., Zandinejad, A., & Özcan, M. (2019). Influence of scan body design and digital implant analogs on implant replica position in additively manufactured casts. Journal of Prosthetic Dentistry, 124(2), 202–210.
https://doi.org/10.1016/j.prosdent.2019.07.011

Revilla-León, M., Fountain, J., Piedra-Cascón, W., Özcan, M., & Zandinejad, A. (2020). Workflow of a fiber-reinforced composite fixed dental prosthesis by using a 4-piece additive manufactured silicone index: A dental technique. Journal of Prosthetic Dentistry, 125(4), 569–575.
https://doi.org/10.1016/j.prosdent.2020.02.030

Revilla‐León, M., Fountain, J., Piedra‐Cascón, W., Zandinejad, A., & Özcan, M. (2019). Silicone Additive Manufactured Indices Performed from a Virtual Diagnostic Waxing for Direct Composite Diastema Closure Combined with Resin Infiltration Technique on White Spot Lesions: A Case Report. Journal of Prosthodontics, 28(8), 855–860.
https://doi.org/10.1111/jopr.13109

Revilla‐León, M., Gohil, A., Barmak, A. B., Zandinejad, A., Raigrodski, A. J., & Pérez‐Barquero, J. A. (2022). Best‐Fit algorithm influences on virtual casts’ alignment discrepancies. Journal of Prosthodontics, 32(4), 331–339.
https://doi.org/10.1111/jopr.13537

Revilla-León, M., Jiang, P., Sadeghpour, M., Piedra-Cascón, W., Zandinejad, A., Özcan, M., & Krishnamurthy, V. R. (2019a). Intraoral digital scans—Part 1: Influence of ambient scanning light conditions on the accuracy (trueness and precision) of different intraoral scanners. Journal of Prosthetic Dentistry, 124(3), 372–378.
https://doi.org/10.1016/j.prosdent.2019.06.003

Revilla-León, M., Jiang, P., Sadeghpour, M., Piedra-Cascón, W., Zandinejad, A., Özcan, M., & Krishnamurthy, V. R. (2019b). Intraoral digital scans: Part 2—influence of ambient scanning light conditions on the mesh quality of different intraoral scanners. Journal of Prosthetic Dentistry, 124(5), 575–580.
https://doi.org/10.1016/j.prosdent.2019.06.004

Revilla-León, M., Jordan, D., Methani, M. M., Piedra-Cascón, W., Özcan, M., & Zandinejad, A. (2020). Influence of printing angulation on the surface roughness of additive manufactured clear silicone indices: An in vitro study. Journal of Prosthetic Dentistry, 125(3), 462–468.
https://doi.org/10.1016/j.prosdent.2020.02.008

Revilla-León, M., Mostafavi, D., Methani, M. M., & Zandinejad, A. (2021). Manufacturing accuracy and volumetric changes of stereolithography additively manufactured zirconia with different porosities. Journal of Prosthetic Dentistry, 128(2), 211–215.
https://doi.org/10.1016/j.prosdent.2020.06.021

Revilla-León, M., Piedra-Cascón, W., Aragoneses, R., Sadeghpour, M., Barmak, B. A., Zandinejad, A., & Raigrodski, A. J. (2021). Influence of base design on the manufacturing accuracy of vat-polymerized diagnostic casts: An in vitro study. Journal of Prosthetic Dentistry, 129(1), 166–173.
https://doi.org/10.1016/j.prosdent.2021.03.035

Revilla-León, M., Smith, Z., Methani, M. M., Zandinejad, A., & Özcan, M. (2020). Influence of scan body design on accuracy of the implant position as transferred to a virtual definitive implant cast.Journal of Prosthetic Dentistry, 125(6), 918–923.
https://doi.org/10.1016/j.prosdent.2020.03.019

Revilla-León, M., Zandinejad, A., Nair, M. K., Barmak, A. B., Feilzer, A. J., & Özcan, M. (2021). Accuracy of a patient 3-dimensional virtual representation obtained from the superimposition of facial and intraoral scans guided by extraoral and intraoral scan body systems. Journal of Prosthetic Dentistry, 128(5), 984–993.
https://doi.org/10.1016/j.prosdent.2021.02.023

Sadid-Zadeh, R., Barmak, A. B., Li, R., & Zandinejad, A. (2024). Maximum fracture load of interim crowns fabricated by additive and subtractive techniques. PubMed, 37(7), 221–226.

Yang, L., Miyanaji, H., Ram, D. J., Zandinejad, A., & Zhang, S. (2016). Functionally graded ceramic based materials using additive manufacturing: review and progress. Ceramic Transactions/Ceramic Transactions, 43–55.
https://doi.org/10.1002/9781119236016.ch5

Zandinejad, A., Abdel-Azim, T., Lin, W., & Morton, D. (2013). Fabrication of a fixed multipurpose template retained by existing dental implants. Journal of Prosthetic Dentistry, 110(2), 144–146.
https://doi.org/10.1016/s0022-3913(13)60356-x

Zandinejad, A., Atarodi, M., Abdel-Azim, T., Leonhart, R. M., & Morton, D. (2014). Complete oral rehabilitation of a patient with hereditary gingival fibromatosis: A clinical report. Journal of Prosthetic Dentistry, 113(1), 1–7.
https://doi.org/10.1016/j.prosdent.2014.07.013

Zandinejad, A., Liang, H., Cosio, N. a. F., & Revilla-León, M. (2021). Fabrication of a complete-arch implant-supported fixed interim prosthesis by using a cone beam computed tomography digital scan for a patient with primordial dwarfism: A dental technique. Journal of Prosthetic Dentistry, 128(6), 1179–1183.
https://doi.org/10.1016/j.prosdent.2021.03.012

Zandinejad, A., Liu, X., Kesterke, M. J., & Kontogiorgos, D. E. (2023). Effect of Different Implant Abutment Materials and Their Surface Characteristics on Human Gingival Fibroblasts Growth (Doctoral dissertation).

Lin, W. S., Harris, B. T., Zandinejad, A., & Morton, D. (2014). CAD/CAM-fabricated telescopic prostheses on periodontally compromised abutments of a patient undergoing intravenous bisphosphonate treatment for osteoporosis: a case report. General dentistry, 62(3), e1–e3.

Miyanaji, H., Zhang, S., Lassell, A., Zandinejad, A. A., & Yang, L. (2016). Optimal process parameters for 3D printing of porcelain structures. Procedia Manufacturing, 5, 870–887.
https://doi.org/10.1016/j.promfg.2016.08.074

Revilla‐León, M., & Zandinejad, A. (2022). Additive manufacturing procedures and clinical applications in restorative dentistry. In Clinical applications of digital dental technology (pp. 60–95).
https://doi.org/10.1002/9781119800613.ch4

Zandinejad, A., Atai, M., & Pahlevan, A. (2005). The effect of ceramic and porous fillers on the mechanical properties of experimental dental composites. Dental Materials, 22(4), 382–387.
https://doi.org/10.1016/j.dental.2005.04.027

Zandinejad, A., & Yilmaz, B. (2024). 3D printing in clinical dentistry. PubMed, 37(7), 3.

Zhang, S., Miyanaji, H., Yang, L., Amir Ali Zandinejad, Dilip, J. J. S., Stucker, B., Department of Industrial Engineering, J.B. Speed School of Engineering, Department of Oral Health and Rehabilitation, School of Dentistry, & University of Louisville, KY, 40292. (2013). An experimental study of ceramic dental porcelain materials using a 3D print (3DP) process. In University of Louisville. https://utw10945.utweb.utexas.edu/sites/default/files/2014-078-Zhang.pdf

Zawada, N., Turner, M., Fleisher, K., & Levine, J. (2016). Osteomyocutaneous rotational flap used to reconstruct a segmental mandible defect due to osteoradionecrosis: A case report and review of the literature. Journal of Oral and Maxillofacial Surgery, 74(9), e81.
https://doi.org/10.1016/j.joms.2016.06.143

Oh, S., Zelig, D., Aalam, A. A., & Kurtzman, G. M. (2023). Case report: utilization of Z-Point fixture “Trans-nasal” implants. Annals of Medicine and Surgery, Publish Ahead of Print.
https://doi.org/10.1097/ms9.0000000000000520

Aalam, A. A., Krivitsky-Aalam, A., Zelig, D., Oh, S., Holtzclaw, D., & Kurtzman, G. M. (2023). Trans-sinus dental implants, for immediate placement when insufficient alveolar height is present: an alternative to zygomatic implants – surgical case series. Annals of Medicine and Surgery, 85(1), 51–56.
https://doi.org/10.1097/ms9.0000000000000201

Mir, R., Sciubba, J. J., Bhuiya, T. A., Blomquist, K., Zelig, D., & Friedman, E. (1988). Merkel cell carcinoma arising in the oral mucosa. Oral Surgery Oral Medicine Oral Pathology, 65(1), 71–75.
https://doi.org/10.1016/0030-4220(88)90195-8

Sacks, H., Zelig, D., & Schabes, G. (1990). Recurrent temporomandibular joint subluxation and facial ecchymosis leading to diagnosis of Ehlers-Danlos syndrome: Report of surgical management and review of the literature. Journal of Oral and Maxillofacial Surgery, 48(6), 641–647.
https://doi.org/10.1016/s0278-2391(10)80484-7